Prequalify Now
Mack Vision CX CXN CXP CXU SBA Hood 1999-Newer Jone's Performance
Learn more
- SKU:
- 30556
- Condition:
- New
- Shipping:
- Calculated at Checkout
Description
Jone's Performance Mack Vision CX CXN CXP CXU Set Back Axle Hood Years 1999-Newer
*Must Verify Original Part # That Came On Your Truck Matches OEM # Below Before Purchase
- Fits Mack Vision CX, CXN, CXP, & CXU Set Back Axle Models (1999-Newer)
- 116" BBC (Bumper to Back of Cab)
- Includes Hinge Bar
- Hap 2001 Certified to Fit
- This is the Hood Only; it Does Not Include Grill, Headlights, or Any Other Parts
- Coremat Added to Suppress Starbursts in High Stress Areas
- E-coated or Galvanized Steel Hardware Used to Resist Corrosion
- Holes Pre-Drilled for Mounting And Accessories
- White Sandable Gel Coat Finish
- High Quality American Made Product
Alerts:
- Mack CX Hood has a 5" Space Between the Edge of Headlight Cutout and the Fender Opening; May Want to Trim 2" Off for Cosmetics Purposes on CX Trucks
- Mack CXU, CXP, CXN Hood has a 7" Space Between the Edge of Headlight Cutout and the Fender Opening
- CXN Will Have Emblem on Nose of Hood
- CXU/CXP has Mack Bulldog Hood Ornament - Holes are Pre-Drilled
- Side Mounting Hinges on Bar Will Not be Used for CXN Trucks
- Sand and Prime Hood Before Painting
*NOTE: Verify fit before painting. Painted hoods are not returnable.
Replaces OEM Part #'s
- CX: 1QM5867-M & 25131386
- CXU: 1QM4314-AM & 82050403
- CXP: 82716357
- CXN: 1QM5921M & 25131924
The Jone's Performance Mack Vision CX CXU CXP CXN Hoods are built with quality and durability in mind. They are made of a one piece construction with inner structures bonded and laminated to provide increased durability for big rigs. All hoods have pre-drilled holes and include accessory hardware such as spring clips, head light bearings and insulation stays. The inner structure steel is stamped, not fabricated, and E coated to resist corrosion. Fender wells are either sprayed with an undercoating or have Coremat to minimize starburst or spider cracking from stones.
Jone's Performance has been manufacturing fiberglass products since the 1970's. They are recognized for providing top quality hoods for the trucking industry. They offer a wide selection of hoods for the following makes; Freightliner, International, Kenworth, Mack, Peterbilt, Sterling, Volvo, Western Star, Ford & GM trucks. All Hoods are a one piece construction and come in a white gel-coat surface backed by a 2 year limited warranty.
*This product ships LTL Freight and the shipping quotes are based on commercial addresses only. If you need a quote to have this delivered to a residential address or farm, please call us so we can provide you with an accurate shipping price. Failing to provide a commercial address could result in delays with processing your order. Please refer to our Shipping Info section at the bottom of our website for more information. All LTL shipments must be inspected prior to signing delivery documentation. Notate damages on the BOL with the freight carrier at time of delivery. Failure to do so will void the claims process and the receiver will be liable for damages.
If you should need additional Truck Parts and Accessories, please don't hesitate to call our toll-free number 1-888-888-7990
Warranty Information
Jones Performance Hood Warranty
Two-year (2 yrs.) limited against manufacturing defects or inner structure failure. WARRANTY COVERS HOOD ONLY. Supplier identification number will be inside each hood for warranty administration. Because of the nature of open molded fiberglass Jones Performance cannot warranty gel-coat cracks. This is also known as starburst or spider cracking. Our experience has shown us that forklifts are generally the biggest culprits, it should be noted, if the forklift forks do not go all the way through the hood (rear to front) do not use forklift to move hood!
NOTE: Please verify fit before painting. Painted hoods are not returnable.
