15 Amp Intelligent Battery Charger By Wagan Tech

15 Amp Intelligent Battery Charger By Wagan Tech

Our Intelligent Chargers feature internal circuitry which detects the battery type, current battery charge, overall battery condition, and automatically responds to optimize charging!

• 15 Amp Intelligent Battery Charger
• For Battery Types: Lithium Iron-Phosphate (LiFePo4), LPF, SLA, AGM, Maintenance Free, Flooded, Wet Cell, VRLA, Gel, Lead-Acid, Vented, Deep Cycle
• Microprocessor Controlled
• Input Voltage: 110-140V AC
• Output Voltage: 12V
• Output Current: 15A (High) 8A Or 2A (low)
• AC Cord Length: 6ft
• DC Cord Length: 6ft
• Protections: Short Circuit, Reverse Polarity, Over Charge, Over Heat
• 6-Stage Charger:
• Soft Start: A Slow Charge Current Is Applied That Slowly Ramps Up To Protect The Battery And Optimize Charging
• Bulk Charging: The Charger Identifies The Battery And Its Needs Then Applies A High Voltage/Amperage Charge To Do The Bulk Of The Charging
• Absorption Charging: When The Battery Reaches 80% Capacity The Input Current Begins To Lower, Also Known As The Cooldown Period
• Evaluation Diagnostic: The Last Diagnostic To Ensure The Battery Is At Optimal Health
• Reconditioning Cycle: Prepares Battery For Bulk Charging And Finalizes The Recovery Charge
• Maintenance Charge: When The Battery Reaches 95% The Charger Will Continue To Apply A Steady Current Up To 100% And Continue To Monitor The Battery And Apply A Charge If It Detects Any Loss
• Winter Charging Mode Helps Maintain Battery When The Temperature Drops Below 41°F(5°C)
• Operating Temperature: 32°F - 104°F (0°C - 40°C)
• Storage Temperature: -4°F - 158°F (-20°C - 70°C)
• Unit Size: 9.0" x 7.0" x 5.0"
• Weight: 3.4lbs
• Certifications: CE, BC
• Sold Individually
• Quality Made Product

If you should need additional Truck Parts and Accessories, please don't hesitate to call our toll-free number 1-888-888-7990